Firgun Ventures Insight
Quantum Sensing And The Future Of Infrastructure Monitoring
Dr. Kris Naudts, Zeynep Koruturk and Donald Harmitt
Quantum computing dominates the headlines and the funding rounds, yet quantum sensing, which does not get the lion’s share of coverage, is quietly and consistently booking revenue today. The field turns the fragile physics of atoms and defects in diamond into instruments that measure gravity, magnetic fields and time with a precision classical hardware cannot reach. Much of the early attention has understandably clustered around defence, where quantum sensors promise navigation without GPS, sharper detection and more resilient timing. However, an equally broad opportunity may be just as significant in critical infrastructure. A noteworthy trend is where the technology lands first as it leaves the laboratory. Quantum sensing is not positioned to win in mass-market consumer devices, where good-enough classical components already dominate. The domain is instead winning in regulated, high-consequence environments where a missed signal is expensive: a buried void beneath a railway, a methane super-emitter venting to atmosphere, a hidden fault inside an advanced chip package or a timing failure that ripples through a telecoms network.
The Early Infrastructure Sensing Market Emerging
The clearest and most intuitive early market sits beneath our feet. Cold-atom gravimeters and gravity gradiometers measure the minute variations in the local gravitational field that betray the density differences marking pipes, tunnels, voids, mineral deposits and buried infrastructure. Think of it as an X-ray for the ground, one that reads mass rather than tissue. In 2022, UK-based University of Birmingham-led team, with Dr Michael Holynski among the key coordinators, demonstrated a quantum gravity gradiometer outside the laboratory for the first time, detecting a tunnel buried a metre below the surface and promising surveys up to 10 times faster than conventional methods. Since then, commercial momentum has followed. Atomionics, a Singapore company backed by BHP Ventures and In-Q-Tel, builds portable gravimeters that feed AI-driven 3D subsurface models to locate the copper, lithium and rare earths the energy transition depends on, while Nomad Atomics, an Australian National University spinout, is ruggedising absolute gravimeters for field work.
The temptation is to sell these instruments as better maps, yet their strategic value lies in prevention rather than discovery. Given that atom-based gravimeters measure against physical constants, they drift far less than classical spring instruments and effectively self-calibrate, which suits them to long-term monitoring rather than one-off surveys. That opens a role in carbon capture, utilisation and storage (CCUS), where operators must prove that injected carbon dioxide stays put, and where time-lapse gravity surveys can track stored gas or displaced groundwater as a proxy for leakage, catching migration or structural failure before anything reaches the surface. On top of that, the economics offer a compelling business case. The signals involved are tiny, often just a few microgals (a unit of acceleration used to measure very small, localised changes in the Earth’s gravity), yet the cost of a storage site failing, a pipeline leaking or a void collapsing under a road can run from millions to billions, and quantum sensing earns its place where a missed measurement is the expensive outcome.
A Promising Opportunity In Semiconductor Inspection
If underground sensing is seen as the most intuitive market, semiconductor inspection may be the most credible outside of defence. Advanced packaging, chiplets and stacked 3D architectures have buried the interconnects that matter most for performance beneath layers that conventional failure analysis was not designed to see. Quantum diamond microscopy addresses that problem directly, using nitrogen-vacancy centres in diamond, which are point defects in synthetic diamond where a carbon atom is replaced by a nitrogen atom adjacent to a lattice vacancy, to image the faint magnetic fields produced by electrical current and to localise faults such as buried shorts without destructively taking a chip apart. QuantumDiamonds, a Technical University of Munich spinout, has commercialised what it describes as the first integrated quantum sensing system for semiconductor failure analysis, running proof-of-concept work with nine of the 10 largest chipmakers and installing systems across Europe, the United States and Taiwan. Despite this, the more realistic perspective today is that incumbency is formidable. Established suppliers such as Bruker, Renishaw and Thermo Fisher Scientific bring decades of fabrication-line integration and are trusted by manufacturers reluctant to pause high-throughput production for unproven equipment. New entrants will need to align with genuine industry transitions and engage early, rather than expecting superior sensitivity alone to displace incumbents.
From The Laboratory To The Field
A recurring misconception is that quantum sensors will replace their classical counterparts, when in practice they augment them. Underground surveys increasingly combine quantum gravity data with ground-penetrating radar, electromagnetic sensing, utility records and geotechnical models, each covering the others' blind spots, and a common pattern uses a stable quantum gravimeter as an absolute reference to correct the drift of more mobile classical instruments. The same hybridisation pattern appears in methane detection, where single-photon detectors sit alongside lidar and laser-based gas analysis (absorption spectroscopy). From an investor perspective, this reframes the question from whether a quantum sensor beats a classical one in isolation to whether it slots into an existing workflow and improves the overall result. The companies most likely to win will treat their sensor as one high-value component in a larger system.
That makes SWaP, meaning size, weight and power, the real adoption bottleneck. The physics may already work, but sensors only become industrial tools when they can leave the optical table, fit into existing workflows, and run reliably in the field. The more difficult question the field is now answering is no longer whether a quantum sensor can measure, but whether it can survive a factory floor, a mine, a hospital or a roadside, which also makes packaging, thermal management, robustness and manufacturability additional hurdles to overcome. However, progress towards commercialisation is accelerating. In 2025, the Fraunhofer Institute for Applied Solid State Physics (IAF) shrank its integrated diamond magnetometer by a factor of 30 in a single year, bringing the sensor head down to the size of the optically pumped magnetometers (OPM) industry already uses and setting a five-fold reduction as its next target. Chip-scale atomic clocks have reached roughly 40 millimetres across, and portable gravimeters are being trialled on trucks, aircraft, ships and drones. None of this is glamorous physics, and that is rather the point, because the gap between a laboratory demonstration and a deployable product is an engineering problem, and it is the one that separates a quantum sensing business from a lab-based scientific experiment.
Sensing As The Quantum Bridge
This commercial readiness is beginning to reshape the wider quantum industry, and the computing majors have noticed. Sensing is one of the quantum domains generating revenue today, which is one of the reasons why IonQ completed its all-stock acquisition of the sensing specialist Vector Atomic in October 2025, folding precision clocks, gravimeters and inertial sensors into a platform still better known for its quantum computers. Infleqtion, which listed on the New York Stock Exchange in February, makes the logic more explicit, selling quantum radio-frequency sensors, atomic clocks and inertial navigation systems to the US Department of Defense and NASA and drawing the majority of its roughly $32.5 million in 2025 revenue from sensing rather than computing, according to CEO Matt Kinsella. The effect is a revenue bridge, a way to fund a slightly longer and equally ambitious bet on quantum computing with income earned from hardware that has an easier commercial entry point.
With that being said, the opportunity is broader than balance sheet support. In critical infrastructure, quantum sensors are becoming tools of prevention and discovery: gravimeters that can reveal buried voids, water movement or structural risk before failure becomes visible, and diamond-based microscopes that can locate hidden defects inside advanced semiconductor packages before they compromise yield or reliability. All in all, sensing and computing are not rivals but two ends of the same industrial arc, and sensing is the end that is already paying its way. By winning first in the markets where failure is most expensive, it is playing its part by quietly contributing to the commercial foundation on which the rest of the quantum economy will stand.
Insights

